|
PRODUCT INFORMATION
|
|
|
|
|
|
|
|
|
|
Shuttle PC60 300W PSU
|
|
|
|
HOVER OVER IMAGES |
|
|
|
|
|
|
|
Replacment for Shuttle PC40 & PC50
The PC60 provides the additional power needed to satisfy the demands of high power graphics cards and large capacity storage devices. The 80PLUS logo identifies PC60 as a modern product with at least 80% energy-efficiency whereas other power supplies range from 65-75% efficiency. It is the optimal solution for power users wanting to upgrade without compromising the efficiency, stability, low-noise, and portability of the XPC. |
|
|
|
|
|
|
|
|
|
|
Shuttle PC60 300W PSU
|
|
|
£59.95
|
|
EX VAT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Details |
Technical Specification |
| Input |
Input Voltage: 100~240V AC
Input Current: 6A / 3A (100/240V AC)
Frequency: 60~50 Hz
Active PFC (Power Factor Correction) |
| Output |
Total combined output (3.3V / 5V / 12V): 300W
Total combined output (3.3V / 5V): 90W
Max. Current: 3.3V: 14.5A / 5V: 15A / 12V: 2x 14A / -12V: 0.3A / 5VSB: 2A
Hold up time: >17ms (full load, 115V AC)
+12V Rise time: <20ms (full load, nominal line)
Short circuit protection (SCP): latch off
Other protection: OTP, OPP, UVP, OCP
Power good signal: TTL compatible
+5V Standby at 2.0A
+3.3V Remote sensing |
| Energy-efficiency |
80 PLUS logo: at least 80% efficient at 20%, 50%, and 100% loads
aligns to the power supply requirements
in the EPA's Energy Star 4.0 standard for computers |
| Connectors |
Mainboard ATX 4 pin (12V) + 20 pin
1x FDD, 3x S-ATA, 2x Molex
Cable length designed for the XPC |
| Environmental |
Operating Temperature: 10~50°C
Storage Temperature: -40~70°C
MTBF: >100.000 hours (75% load, 25°C) |
| RFI/ EMI/ Safety |
FCC class B, CE, BSMI, CCC |
| Acoustic |
<30dB at 50cm for 200W LoadGeneral |
| Other |
Dimension: 190 x 82 x 43 mm (l x w x h) |
| XPC compatibility |
Compatible with XPC chassis G, G2, G5, G6 and the models ST61G4, D10, K45, K48, |
| NOT compatible |
SD11G5, SS58G2, SK83G, SN85G4, SN95G5 and ST20G5. |
|
|
|
|
|